+31 (0) 72 571 66 88

Our corporate group

  • Heilig Group

Our other companies

  • Antha Pol | Engineering & Production
  • Beemster | Electrical Solutions
  • Bezner | Waste Management Solutions
  • Bezner-Oswald | Wood Processing Machines
  • B+B Anlagenbau | Plastic Recycling Solutions
  • FastFeetGrinded | Footwear Recycling
  • Geurts | Heat Exchangers
  • Heilig Beton | Circular Concrete Goods
  • Heilig Fabrication | Metalworking Services
  • Heilig Mixing Technology | Mixing Technology
  • N.M. Heilig B.V. | From Concept To Installation
  • NMH SRO | Engineering & Production
  • Recco | Non-Ferrous Recycling
+31 (0) 72 571 66 88

Nautitrans boat transporter with 60 ton lifting capacity

10 tonnes extra! We are very happy with the result of the cooperation between us and our customer Asjes technisch handelscentrum bv in Alkmaar. Asjes produced two Nautitrans boat transporters with a lifting capacity of 60 tonnes for Yacht Center Stevensweert and Van der Laan Yachting. Previously Asjes could produce up to 50 tonnes of Nautitrans boat transporters, but now a new model has been developed which increases the lifting capacity by 10 tonnes.

Asjes technische handelscentrum asked Heilig Fabrication as producer to do the detail engineering and to produce the construction parts.

Project highlights:

Country:              Netherlands/Alkmaar
Client:                 Asjes/Nautitrans
Application:         Boottransporter
Capacity:            60 ton

Do you want to know more:

Sales team
E:info@heiligfabrication.com
T: +31 (0) 72 571 66 88

Or fill in our contact form:

REQUEST CONTACT

This is how we roll

Boottransporter

Boat transporter finished

Boottransporter

Ready to use

Boottransporter

Boat transporter finished

Boottransporter

Ready to use

Request information?

Step 1 of 2

  • Project information

  • Drop files here or
    Accepted file types: dxf, dwg, pdf, Max. file size: 64 MB.
      Upload cutting drawing in dxf format (this drawing has no hard lines, dotted lines, broken lines, double lines).
      - White lines are cutting lines.
      - Yellow lines are graphite lines.
      - Red lines are read-only information, for example numbers, thickness of material and type of material.
    • Indicate information in the cutting drawing, see the red lines above and for an example see here.
    • For the bending of sheet metal we need a PDF file, a DWG file or a STEP file on which the angle of the bending is indicated.
      Drop files here or
      Accepted file types: pdf, dwg, step, Max. file size: 64 MB.